CMD TECHNOLOGY, INC.

CSA-6400E

Card Type

Hard drive controller

Hard Drives supported

Four IDE (AT) drives

Floppy drives supported

None

Data Bus

32-bit PCI

Card Size

Half length, full-height

CONNECTIONS

Function

Location

Function

Location

40-pin secondary IDE(AT) connector

CN1

Drive active LED

CN3

40-pin primary IDE(AT) connector

CN2

Paddle board connector

CN4

USER CONFIGURABLE SETTINGS

Function

Label

Position

»

DskChg (removable media) disabled

W2/1

Open

 

DskChg (removable media) enabled

W2/1

Closed

»

Base address enabled

W2/2

Closed

 

Base address disabled

W2/2

Open

»

PCI chip enabled

W2/3

Open

 

PCI chip disabled

W2/3

Closed

»

Factory configured - do not alter

W3/ 1 - 4

Open

»

Factory configured - do not alter

W4/ 1 - 4

Open

»

Factory configured - do not alter

W5

Open

»

Normal base addressing (Legacy mode) enabled

W6/pins 2 & 3

Closed

»

Normal base addressing (Legacy mode) enabled

W7/pins 2 & 3

Closed

Note:W6 & W7 pins 1 & 2 positions are not used.