DAYNA COMMUNICATIONS, INC.

SCSI/LINK-3, SCSI/LINK-3 PB

Card Type

Network Interface Card

NIC Type

Ethernet

Maximum Onboard Memory

Unidentified

Boot ROM

Not available

Network Transfer Rate

10Mbps

Topology

Linear Bus, Star

Wiring Type

Unshielded twisted pair

AUI transceiver via DB-15 port

RG-58A/U 50ohm coaxial

Data Bus

SCSI

CONNECTIONS

Function

Label

Function

Label

RJ-45 connector

CN1

25-pin SCSI connector - input

CN4

AUI transceiver via DB-15

CN2

25-pin SCSI connector - output

CN5

BNC connector

CN3

DC Power connector

CN6

Note: Connectors CN4 & CN5 allow SCSI/Link to be daisy-chained with other devices.

USER CONFIGURABLE SETTINGS

Function

Label

Position

»

SCSI/Link termination switch enabled

SW1

On

 

SCSI/Link termination switch disabled

SW1

Off

Note: If the SCSI/Link is not the last device in the SCSI chain, the internal termination switch must be turned off.

SCSI ID SELECTION

ID

SW2

 

0

0

 

1

1

 

2

2

»

3

3

 

4

4

 

5

5

 

6

6

 

7

7

DIAGNOSTIC LED(S)

LED

Color

Status

Condition

Power

Amber

On

Power is on

Power

Amber

Off

Power is off

Activity

Green

On

Data is being transmitted/received

Activity

Green

Off

Data is not being transmitted/received

Activity

Red

On

Error condition

Link status

Green

On

UTP link is good

Link status

Green

Off

UTP link is broken

MISCELLANEOUS TECHNICAL NOTES

The SCSI/Link-3 comes with a 25-pin to 25-pin SCSI cable that connects to Desktop Macintosh computers. The SCSI/Link-3PB comes with a 30-pin to 25-pin cable that connects to Powerbook Macintosh computers. Additional cables are available from manufacturer.