LANTECH TECHNOLOGY, INC.

PTC-1001 SERIES

NIC Type

Ethernet

Transfer Rate

10Mbps

Data Bus

16-bit ISA

Topology

Linear Bus

Wiring Type

Shielded/Unshielded Twisted Pair

RG-58A/U 50ohm coaxial

Boot ROM

Available

COMPATIBILITY MODE

Setting

JP1A

»

Disabled

Open

 

Enabled

Closed

Note:On some systems the data bus timing is not truly IBM PC/AT compatible. If the card is not

BOOT ROM

Setting

JP1B

»

Disabled

Open

 

Enabled

Closed

BASE MEMORY ADDRESS

Address

JP1C

JP1D

JP1E

 

C0000h

Open

Open

Open

 

C4000h

Closed

Open

Open

 

C8000h

Open

Closed

Open

 

CC000h

Closed

Closed

Open

»

D0000h

Open

Open

Closed

 

D4000h

Closed

Open

Closed

 

D8000h

Open

Closed

Closed

 

DC000h

Closed

Closed

Closed

I/O BASE ADDRESS

I/O

JP1F

JP1G

»

300h

Open

Open

 

320h

Open

Closed

 

340h

Closed

Open

 

360h

Closed

Closed

INTERRUPT REQUEST

IRQ

JP2A

JP2B

JP2C

JP2D

JP2E

JP2F

JP2G

JP2H

JP2I

 

2/9

Closed

Open

Open

Open

Open

Open

Open

Open

Open

»

3

Open

Closed

Open

Open

Open

Open

Open

Open

Open

 

4

Open

Open

Closed

Open

Open

Open

Open

Open

Open

 

5

Open

Open

Open

Closed

Open

Open

Open

Open

Open

 

7

Open

Open

Open

Open

Closed

Open

Open

Open

Open

 

9

Open

Open

Open

Open

Open

Closed

Open

Open

Open

 

10

Open

Open

Open

Open

Open

Open

Closed

Open

Open

 

11

Open

Open

Open

Open

Open

Open

Open

Closed

Open

 

12

Open

Open

Open

Open

Open

Open

Open

Open

Closed

CABLE TYPE

Type

JP5

»

RG-58A/U 50ohm coaxial

Pins 1 & 2 closed

 

Shielded/Unshielded Twisted Pair

Pins 2 & 3 closed

Note:The PTC-1001 BASE 2 model has a RG-58A/U 50ohm coaxial connector only. The PTC-1001 BASE T model has a Shielded/Unshielded Twisted Pair connector only. The PTC-1001 BASE 2/T model (shown in diagram) has both RG-58A/U 50ohm coaxial and Shielded/Unshielded Twisted Pair connectors.