CONNECT TECH, INC.

INTELLICON-NT960

Card Type

Serial

Processor

Intel i960

Processor Speed

Unidentified

Chip Set

Cirrus Logic CD1400 (on external module)

Maximum Onboard Memory

2MB SRAM/256KB dual-ported SRAM

I/O Options

Serial ports (128)

Data Bus

16-bit ISA

CONNECTIONS

Function

Label

Serial ports via DB-37 connector

CN1

Note:Standard serial ports are provided on an external expansion box.

USER CONFIGURABLE SETTINGS

Setting

Label

Position

»

Factory configured - do not alter

J11

Unidentified

»

Card will use 8-bit transfer mode

J12

Open

 

Card will use 16-bit transfer mode

J12

Closed

»

Factory configured - do not alter

J13

Unidentified

»

Factory configured - do not alter

SW2/6

On

»

Factory configured - do not alter

SW2/7

On

»

Factory configured - do not alter

SW2/8

On

BASE I/O ADDRESS

Setting

SW1/1

SW1/2

SW1/3

SW1/4

SW1/5

SW1/6

SW1/7

SW1/8

 

000h

On

On

On

On

On

On

On

On

 

004h

Off

On

On

On

On

On

On

On

 

008h

On

Off

On

On

On

On

On

On

 

00Ch

Off

Off

On

On

On

On

On

On

 

010h

On

On

Off

On

On

On

On

On

»

300h

On

On

On

On

On

On

Off

Off

 

3ECh

Off

Off

On

Off

Off

Off

Off

Off

 

3F0h

On

On

Off

Off

Off

Off

Off

Off

 

3F4h

Off

On

Off

Off

Off

Off

Off

Off

 

3F8h

On

Off

Off

Off

Off

Off

Off

Off

 

3FCh

Off

Off

Off

Off

Off

Off

Off

Off

Note: A total of 256 base address settings are available. The switches are a binary representation of the decimal memory addresses. SW1/8 is the Most Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have the following decimal values: SW1/8=512, SW1/7=256, SW1/6=128, SW1/5=64, SW1/4=32, SW1/3=16, SW1/2=8, SW1/1=4. Turn off the switches and add the values of the switches that are off to obtain the correct memory address. (Off=1, On=0)

SHARED RAM ADDRESS

Setting

SW2/1

SW2/2

SW2/3

SW2/4

SW2/5

 

C0000h

On

On

On

On

On

 

C2000h

Off

On

On

On

On

 

C4000h

On

Off

On

On

On

 

C6000h

Off

Off

On

On

On

 

C8000h

On

On

Off

On

On

»

D0000h

On

On

On

Off

On

 

F6000h

Off

Off

On

Off

Off

 

F8000h

On

On

Off

Off

Off

 

FA000h

Off

On

Off

Off

Off

 

FC000h

On

Off

Off

Off

Off

 

FE000h

Off

Off

Off

Off

Off

Note: A total of 32 base address settings are available. The switches are a binary representation of the decimal memory addresses. SW2/5 is the Most Significant Bit and switch SW2/1 is the Least Significant Bit. The switches have the following decimal values: SW2/5=131072, SW2/4=65536, SW2/3=32768, SW2/2=16384, SW2/1=8192. Turn off the switches and add the values of the switches that are off to a base value of 786,432 to obtain the correct memory address. (Off=1, On=0)

SRAM

There may be between 64KB and 2MB of SRAM memory on this card. Its configuration is unidentified.

DUAL-PORTED SRAM

There may be between 64KB and 256KB of dual-ported SRAM memory on this card. Its configuration is unidentified.

INTERRUPT

Setting

J1/A

J1/B

J1/C

J1/D

J1/E

 

IR/FONT>

Open

Open

Open

Open

Open

 

IRQ3

Open

Open

Open

Open

Open

 

IRQ4

Open

Open

Open

Open

Open

 

IRQ5

Open

Open

Open

Open

Open

 

IRQ6

Open

Open

Open

Open

Open

 

IRQ7

Open

Open

Open

Open

Open

»

IRQ10

Open

Open

Open

Open

Closed

 

IRQ11

Open

Open

Open

Closed

Open

 

IRQ12

Open

Open

Closed

Open

Open

 

IRQ14

Closed

Open

Open

Open

Open

 

IRQ15

Open

Closed

Open

Open

Open

INTERRUPT (CON’T)

Setting

J2/A

J2/B

J2/C

J2/D

J2/E

J2/F

 

IR/FONT>

Open

Open

Open

Open

Open

Closed

 

IRQ3

Closed

Open

Open

Open

Open

Open

 

IRQ4

Open

Closed

Open

Open

Open

Open

 

IRQ5

Open

Open

Closed

Open

Open

Open

 

IRQ6

Open

Open

Open

Closed

Open

Open

 

IRQ7

Open

Open

Open

Open

Closed

Open

»

IRQ10

Open

Open

Open

Open

Open

Open

 

IRQ11

Open

Open

Open

Open

Open

Open

 

IRQ12

Open

Open

Open

Open

Open

Open

 

IRQ14

Open

Open

Open

Open

Open

Open

 

IRQ15

Open

Open

Open

Open

Open

Open