TELEBIT CORPORATION

T1000PC

Card Type

Modem (synchronous/asynchronous)

Processor

Motorola 68000

Processor Speed

Unidentified

Chipset

Unidentified

Maximum Data Rate

9600bps

Data Bus

8-bit ISA

Data Modulation

Bell 103A/212A

ITU-T V.22, V.22bis

Telebit PEP

Error Correction/Compression

MNP5

CONNECTIONS

Function

Label

Function

Label

Line in

CN1

Line out

CN2

USER CONFIGURABLE SETTINGS

Setting

Label

Position

í Factory configured - do not alter

JP1

Unidentified

í Factory configured - do not alter

E25

Unidentified

SERIAL PORT CONFIGURATION

Address

IRQ

E22

E23

E24

3F8h (COM1:)

IRQ4

Pins 1 & 2 closed

Pins 1 & 2 closed

Pins 2 & 3 closed

2F8h (COM2:)

IRQ3

Pins 2 & 3 closed

Pins 1 & 2 closed

Pins 1 & 2 closed

3E8h (COM3:)

IRQ4

Pins 1 & 2 closed

Pins 2 & 3 closed

Pins 2 & 3 closed

2E8h (COM4:)

IRQ3

Pins 2 & 3 closed

Pins 2 & 3 closed

Pins 1 & 2 closed

TRANSMISSION LEVEL SELECTION

Setting

R5

0 dBm

4.32K ohm

-1.5 dBm

5.11K ohm

-3 dBm

6.04K ohm

-4.5 dBm

7.15K ohm

-6 dBm

8.66K ohm

-7.5 dBm

10.2K ohm

-9 dBm

12.1K ohm

-10.5 dBm

14.3K ohm

-12 dBm

16.9K ohm

-13.5 dBm

20.5K ohm

-15 dBm

24.3K ohm

Note: R5 is a plug-in resistor that can be used to change the transmitted power level.

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, ‘comma’, A/

A, C, E, F, H, M, O, V, X, Z

&F, &T

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12

Note: See MHI documentation for complete information.

Proprietary AT Command Set

See TELEBIT CORPORATION TRAILBLAZER PLUS PC for a full command summary.